| Print |

Mesh
line
Assortment


BRAIDED MESH
GOST 5336-80,
TU U 28.7-00191046-016-2003

The braided mesh is made according to GOST 5336-80, TU U 28.7-00191046-016-2003 standards. The mesh is applied for territory fencing, for mountainside protection and so on. The mesh is produced from low carbon wire of different diameters.
TYPE OF COATING:
- uncoated;
- galvanized. TYPE OF CELLS:
- rhombic, with 60 dg. acute angle of rhomb;
- square.
Mesh characteristic by cells size.

MESH WITH RHOMBIC CELLS acc. to TU U 28.7-00191046-016-2003:
Mesh number Nominal size of cells one side, mm Maximum deviation of cells one side, mm The line of nominal diameters of wire, mm
For 1 group For 2 group
5 5 +0,3 +0,5/-0,2 0,80; 0,90; 1,00; 1,20
6 6 +0,4 +0,б/-0,3 0,90; 1,00; 1,10; 1,20; 1,25; 1,30; 1,40
8 8 +0,4 +0,8/-0,4 1,00; 1,10; 1,20; 1,25; 1,30; 1,40; 1,50; 1,60

MESH WITH RHOMBIC OR SQUARE CELLS:
Mesh number Nominal size of cells one side, mm Maximum deviation of cells one side, mm The line of nominal diameters of wire, mm
For 1 group For 2 group
10 10 +0,6 +1,1/-0,4 0,90; 1,00; 1,10; 1,20; 1,25; 1,30; 1,40; 1,50; 1,60
12 12 +0,7 +1,2/-0,5 1,00; 1,10; 1,20; 1,25; 1,30; 1,40; 1,50; 1,60; 1,70; 1,80
15 15 +0,9 +1,5/-0,7 1,20; 1,25; 1,30; 1,40; 1,50; 1,60; 1,70; 1,80
18 18 +1,1 +1,8/0,9 1,40; 1,60; 1,70; 1,80; 1,90; 2,00
20 20 +1,2 +2.0/-1.0 1,20; 1,40; 1,60; 1,70; 1,80; 1,90; 2,00; 2,10; 2,20

MESH WITH SQUARE CELLS:
Mesh number Nominal size of cells one side, mm Maximum deviation of cells one side, mm The line of nominal diameters of wire, mm
For 1st group For 2nd group
25 25 +1,5 +2,5/-1,0 1,60; 1,70; 1,80; 1,90; 2,00; 2,10; 2,20; 2,30; 2,40; 2,50
30 30 +1,8 +3,0/1,3 1,60; 1,70; 1,80; 1,90; 2,00; 2,10; 2,20; 2,30; 2,40; 2,50; 2,60
35 35 +2,3 +3.5/-1.5 1,80; 1,90; 2,00; 2,10; 2,20; 2,30; 2,40; 2,50; 2,60
40 40 +2,4 +4,0/-2,0 1,80; 2,00; 2,10; 2,20; 2,30; 2,40; 2,50; 2,70; 2,80; 3,00; 3,15; 3,20
45 45 +2,7 +4.5/-2.1 2,20; 2,40; 2,50; 2,60; 2,80; 3,00; 3,15; 3,20; 3,40
50 50 +3,0 +5,0/-2,5 2,00; 2,20; 2,40; 2,50; 2,60; 2,80; 3,00; 3,15; 3,20; 3,40
60 60 +3,6 +6,0/-3,0 2,40; 2,50; 2,80; 3,00; 3,15; 3,20; 3,40
70 70 +4,2 +7,0/-3,5 2,60; 2,80; 3,00; 3,15; 3,20; 3,40
80 80 +4,8 +8,0/-4,0 2,80; 3,00; 3,15; 3,20; 3,40; 3,60; 3,80; 4,00; 4,20
90 90 +5,4 +9,0/-4,5 3,00; 3,15; 3,20; 3,40; 3,60; 4,00; 4,20; 4,50
100 100 +6,0 +10,0/-5,0 4,00; 4,20; 4,50; 5,00; 5,60

Mesh is delivered in rolls.
Roll consists from one piece of mesh min 5 m or 10 m length, depending on mesh number. The weight of one roll is max 80 kg. The mesh number 80 - 100 could be delivered in rolls with weight up to 250 kg.

<<Assortment